产品介绍
The Blackline H3H+ is a very high performance, all-horn, three-way system in a single, horizontally formatted, wide-bandwidth package. New drivers have been developed for improved performance in all bands. The Hybrid® low frequency section comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil driver that is reflex loaded to extend the LF output to below the natural cut-off point of the horn. The new LF driver features a water resistant cone and triple roll surround for increased excursion.
The mid-horn of the H3H+ has a unique ‘phase-ball’ loading device which maintains the constant directivity characteristics of the horn at the upper end of its range. It is driven by a new 10” (250mm) midrange driver with an aluminium demodulating ring for improved high-mid clarity and reduced distortion when driven hard. The 70° x 40° HF section of the H3H+ features a neodymium 1” (25mm) exit compression driver with a Kapton diaphragm for high sensitivity and extended HF performance. The internal mid/high passive crossover allows this three-way system to be driven in a bi-amp configuration.
A Martin Audio M3+ or DX1.5 Electronic Controller is available to provide H3H+ crossover and limiter facilities.
FEATURES
All-horn three-way system
‘Phase-ball’ loaded mid-driver
Hybrid® LF section
Fitted with handles and castors
Horizontal format for low profile installs
Five year limited warranty
TECHNICAL SPECIFICATIONS |
|
TYPE |
Three-way bi-amp trapezoid Hybrid® fully hom loaded |
FREQUENCY RESPONSE(5) |
50Hz-18kHz±3dB |
DRIVERS |
15"(380mm)/4"(100mm) coil bass driver |
10"(250mm)/2.5"(63.5) coil mid driver |
|
1"(25mm) exit HF compression driver |
|
RATED POWER(2) |
LF:750W AES,3000W peak |
MF + HF:300W AES,1200W peak |
|
RECOMMENDED AMPLIFIER |
LF:MA5.2K |
MF + HF:MA2.0 |
|
SENSITIVITY(6) |
LF:104dB,MF + HF:104dB |
MAXIMUM SPL(9) |
133dB continuous,139dB peak |
NOMINAL IMPEDANCE |
LF:8 ohms,MF + HF:8 ohms |
DISPERSION(-6dB) |
70°horizontal,40°vertical |
CROSSOVER |
200Hz active,2kHz passive |
ENCLOSURE |
250 litre,multi-laminate birch ply |
FINISH |
Textured black paint |
PROTECTIVE GRILLE |
Black perforated steel |
CONNECTORS |
2×Neutrik NL4 |
PIN CONNECTIONS |
LF+,-:1+,1-,(MF + HF)+,-:2+,2- |
FITTINGS |
12×M10 inserts |
4×4"(100mm) castors,4×pocket handles |
|
DIMENSIONS(inc wheels) |
(W)1066mm×(H)560mm×(D)780mm(911mm) |
(W)42ins×(H)22ins×(D)30.7ins(35.9ins) |
|
WEIGHT |
77.5kg(170.5lbs) |